Wire Harness Protection » Thermal Protection
Thermal management sleeves are designed to operate under high temperatures and provide superior fire resistance under extreme conditions. These sleeves are difficult to ignite and self-extinguish promptly.
Aramid Armor
Aramid Armor is an extra heavy duty, tightly woven sleeve braided from aramid fibers, soft and pliable but with 5 times strength of steel on equal-weight basis. Perfect for bundling and protecting vulnerable components from the most extreme environmental conditions, the aramid fibers provide durability, pliability and extraordinary tensile strength. The inherent strength and heat resistance of Aramid Armor ... [more]
FireFlex
FireFlex fiberglass/silicone sleeving is engineered to protect hoses, cables and wire harnesses from damage due to exposure to extreme heat, open flame, molten splash and welding sparks. The thick, high temperature fiberglass sleeve is jacketed with a non-permeable, heavy silicone coating that is flexible enough to follow tight radius curves, resists all automotive chemicals and solvents, and provides a sub... [more]
Flexo PPS
Flexo PPS is an expandable sleeving braided from 8 mil flame resistant PolyPhenylene Sulfide (PPS) monofilament fiber, extremely lightweight, resistant to high temperatures, and virtually impervious to solvents. Flexo PPS is ideal for aerospace, telecom and military applications and meets many engineering goals including; chemical resistance, high temperature stability, low moisture absorption, excellent di... [more]
FyreJacket Aerospace Grade
FyreJacket Aerospace Grade is a thick wall braided fiberglass sleeving coated with specially compounded silicone rubber intended to slide on easily over a variety of cables and hoses and expand readily to go over fittings and couplings. It is used to protect hoses and hose assemblies, tubing, piping, wires, wire assemblies, and cables from exposure from molten splash and welding sparks.
Insultherm
Insultherm is braided from fiberglass yarns and saturated with high temperature resins that improve the product's stability and minimize irritating fiberglass dusting during cutting and installation. The sleeving is tough and durable, maintaining its tight structure under extreme vibration, abrasion, mechanical stress and temperature variations. Insultherm is available in a wide range of diameters, cuts cle... [more]
Insultherm Sleeves
Insultherm Spark Plug Boot Sleeves are completely non-conductive, resist all engine chemicals, will not support combustion, and provide an easy, economical solution to the challenge of wire protection in the cramped, high temperature environment of any high performance engine compartment. Once installed, the sleeves require no clearance from hot surfaces, and can even rest directly on hot exhaust headers wi... [more]
Insultherm Tru-Fit
Insultherm Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. This sleeve is engineered for applications where temperatures as high as 1,200°F may be encountered. Insultherm Tru-Fit provides a sturdy, long lasting and inexpensive insulation solution. It is flexible and expandabl... [more]
Insultherm Ultraflexx
Insultherm Ultraflexx fiberglass sleeving is ideal for the protection of wires and hoses exposed to the heat generated from high performance engine and exhaust components. The heat treated sleeving cuts with scissors and is highly flexible. Ultraflexx expands slightly, allowing it to slide easily over wires and follow curves and contours without binding.
Insultherm Ultraflexx PRO
The heavy wall construction, large available diameters and high expandability of Ultraflexx PRO provides a high level of protection and ease of installation when used to insulate pipes and hoses subject to abrasion and vibration. Ultraflexx Pro cuts easily with scissors, and special heat treated construction minimizes fraying and dusting during assembly. Increased wall thickness adds value to insulation.
Silica Sleeve
Silica Sleeve is braided into a strong and flexible sleeve from silica yarns. The thick 60 mil walls of this sleeving provide enhanced thermal protection up to 1,800°F. Densely woven Silica Sleeve is ideal for protection of delicate components and personnel from exposure to high temperature exhausts and pipes. This product cuts easily with scissors or shears and expands to allow easy installation over w... [more]
T6 ThermaShield
T6 ThermaShield's highly reflective aluminized exterior, combined with the insulating fiberglass interior, protects delicate wire bundles, cables and lines from damage caused by nearby exhaust pipes, headers or other heat generating components. Just wrap the pre-formed, split flexible tube around any component and seal the sides with the high temperature adhesive strip to provide protection from hot pipes a... [more]
Techon PFA
Techon PFA expandable sleeving is constructed of 16 mil perfluoroalkoxy (PFA) polymer monofilament and is ideal in applications where flame, chemical and very high temperature resistance are significant considerations. The high temperature properties of Techon PFA make it the ideal choice for aerospace, military, and high-tech applications where thermal stability and low outgassing are critical. Techon PFA ... [more]
Therm-L-Wrap 66
Therm-L-Wrap 66 is a self-wrapping sleeve composed of a woven fiberglass base fabric and a lamination of aluminum foil, designed to provide thermal protection from both radiant and convective heat. The product can withstand convective heat soaks up to 200C and simultaneously protect critical components from radiant or reflected heat. Its woven structure allows the product to maintain a circular profile whe... [more]
Thermal-L-Lite FG
Thermal-L-Lite FG is a unique, one-piece fiberglass sleeve that permits the sleeve to boast a virtually seamless and non-fraying construction. This sleeve provides superior fluid resistance and maximum protection for tubing's and hoses, engine wire harnesses, and other critical components requiring radiant heat protection.
ThermaShield Convoluted
ThermaShield is engineered by laminating an aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation that will endure up to 1,200°F without delaminating, turning brittle or suffering adhesive failure. They are ideal in any situation where protection from radiant heat is a primary concern. This system provides superior protection from radiant heat by reflecting it away... [more]
ThermaShield Flat
ThermaShield is engineered by laminating an aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation that will endure up to 1,200°F without delaminating, turning brittle or suffering adhesive failure. They are ideal in any situation where protection from radiant heat is a primary concern. This system provides superior protection from radiant heat by reflecting it away... [more]
ThermaShield Tube
ThermaShield is engineered by laminating an aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation that will endure up to 1,200°F without delaminating, turning brittle or suffering adhesive failure. They are ideal in any situation where protection from radiant heat is a primary concern. This system provides superior protection from radiant heat by reflecting it away... [more]
ThermaShield Wrap
ThermaShield is engineered by laminating an aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation that will endure up to 1,200°F without delaminating, turning brittle or suffering adhesive failure. They are ideal in any situation where protection from radiant heat is a primary concern. This system provides superior protection from radiant heat by reflecting it away... [more]
ThermoJacket R
ThermoJacket R sleeving is constructed of braided, uncoated fiberglass resulting in a product cable of withstanding continuous temperatures of up to 540 C. Its slick, cloth-like surfaces, both inside and outside of the sleeve, attribute to the low friction factor of the product.
ThermoJacket S
ThermoJacket S is a stiff, fiberglass sleeve that withstands long-term heat up to 540 C. Its stiff coating results in a rigid sleeve capable of providing superior abrasion resistance and excellent long-term heat protection for hoses, wire harnesses, and cables.
Vectran
Vectran is a high-performance multifilament yarn spun from liquid crystal polymer that demonstrates minimal moisture absorption, outstanding cut and abrasion resistance, high dielectric strength, and melt temperature of 625°F. Pound for pound, Vectran fiber is five times stronger than steel and ten times stronger than aluminum, which makes it the material of choice in demanding applications where other ... [more]
Volcano Wrap
Volcano Wrap is made from continuous filament basalt fiber and is engineered for protection from temperatures 1,500°F. When wrapped around exhaust pipes, the unique construction creates attractive and durable finished product. Volcano Wrap is 25% stronger and provides a 300°F increase in temperature protection over fiberglass wrap. The product is very rugged, and will not exhibit any vibration damag... [more]
